name: <alsa_input.usb-ZhuHai_JieLi_Technology_JieLi_BR21_20180105-01.analog-stereo>
		driver: <module-alsa-card.c>
		flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
		state: SUSPENDED
		suspend cause: IDLE
		priority: 9049
		volume: front-left: 26281 / 40% / -23.81 dB,	front-right: 26281 / 40% / -23.81 dB
				balance .00
		base volume: 26281 / 40% / -23.81 dB
		volume steps: 65537
		muted: no
		current latency: .00 ms
		max rewind: 0 KiB
		sample spec: s16le 2 ch 48000 Hz
		channel map: front-left,front-right
					Stereo
		used by: 0
		linked by: 0
		configured latency: .00 ms; range is .50 .. 2000.00 ms
		card: 19 <alsa_card.usb-ZhuHai_JieLi_Technology_JieLi_BR21_20180105-01>
		module: 43
		properties:
				alsa.resolution_bits = "16"
				device.api = "alsa"
				device.class = "sound"
				alsa.class = "generic"
				alsa.subclass = "generic-mix"
				alsa.name = "USB Audio"
				alsa.id = "USB Audio"
				alsa.subdevice = "0"
				alsa.subdevice_name = "subdevice #0"
				alsa.device = "0"
				alsa.card = "3"
				alsa.card_name = "JieLi BR21"
				alsa.long_card_name = "ZhuHai JieLi Technology JieLi BR21 at usb-0000:00:1d.0-1.6.4, full speed"
				alsa.driver_name = "snd_usb_audio"
				device.bus_path = "pci-0000:00:1d.0-usb-0:1.6.4:1.1"
				sysfs.path = "/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.4/2-1.6.4:1.1/sound/card3"
				udev.id = "usb-ZhuHai_JieLi_Technology_JieLi_BR21_20180105-01"
				device.bus = "usb"
				device.vendor.id = "e5b7"
				device.vendor.name = "ZhuHai JieLi Technology"
				device.product.id = "0811"
				device.product.name = "JieLi BR21"
				device.serial = "ZhuHai_JieLi_Technology_JieLi_BR21_20180105"
				device.string = "front:3"
				device.buffering.buffer_size = "384000"
				device.buffering.fragment_size = "192000"
				device.access_mode = "mmap+timer"
				device.profile.name = "analog-stereo"
				device.profile.description = "Analogové stereo"
				device.description = "JieLi BR21 Analogové stereo"
				module-udev-detect.discovered = "1"
				device.icon_name = "audio-card-usb"
		ports:
				analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: unknown)
						properties:
								device.icon_name = "audio-input-microphone"
		active port: <analog-input-mic>