Please check your configuration bit settings and program
the device before proceeding.
Stepping target failed
Tuto hlasku mi vypise MPLAB pri pokuse o debugovanie.
Debugger skusam prvy raz, cize som ho este nemal nikdy funkcny.
O error hlaske je na nete kopec, skusal som menit configuracne nastavenia, ale nefunguje nic...
Skusam to aj s uplne jednoduchym programom LED_BLINK - v code.
Mohol by niekto prosim program skusit u seba, ci nemam nejaky problem s hardverom?Popr. poslat nejaky program, ktory je u neho funkcny na jeho PC...
Pri pokuse o nejaku operaciu(napr.STEP IN), sa LED dioda rychle rozblika az postupne zhasne.Potom uz blika podla programu a debugovanie nefunguje...
Kód: Vybrat vše
;************************************************************
; Processor: PIC16F628 at 4 MHz using internal RC oscillator
; Function: Flash a LED connected to RA2
; Hardware: Testboard K4
; Filename: 628LED.asm
; Author: Lars Petersen, oz1bxm@pobox.com
; Website: www.qsl.net/oz1bxm/PIC/pic.htm
; Credit: Tony Nixon's LED flasher
;************************************************************
LIST P=16F628, R=DEC ; Use the PIC16F628 and decimal system
#include "P16F628.INC" ; Include header file
__config _INTRC_OSC_NOCLKOUT & _LVP_OFF & _WDT_OFF & _PWRTE_ON & _BODEN_ON
CBLOCK 0x20 ; Declare variable addresses starting at 0x20
Loop1,Loop2
ENDC
;
; -----------
; INITIALIZE
; -----------
;
ORG 0x000 ; Program starts at 0x000
CLRF PORTA ; Initialize port A
CLRF PORTB ; Initialize port B
BSF STATUS,RP0 ; RAM bank 1
CLRF TRISA ; All pins port A output
CLRF TRISB ; All pins port B output
BCF STATUS,RP0 ; RAM bank 0
;
; ------------------------
; FUNCTION OF PORT A PINS
; ------------------------
;
MOVLW 7
MOVWF CMCON ; Comparators off, all pins digital I/O
;
; ----------
; MAIN LOOP
; ----------
;
Main BSF PORTA,2 ; Turn on LED connected to RA2
CALL delay
BCF PORTA,2 ; Turn off LED connected to RA2
CALL delay
GOTO Main
;
; ---------------
; DELAY 250 MSEC
; ---------------
;
delay MOVLW 250
MOVWF Loop1
Outer MOVLW 200
MOVWF Loop2
Inner NOP
NOP
DECFSZ Loop2,F
GOTO Inner ; Inner loop = 5 usec.
DECFSZ Loop1,F
GOTO Outer
RETURN
END
OK 22-9-2002.
Assembler: Microchip MPASM 3.00
Programmer: P16PRO40 (Bojan Dobaj)
Programmer software: WinPicProg 1.9 (Nigel Goodwin) 
